Light Pine
Pale pine, decades dry. Watch how fast it soaks in.
Spend $79 more to get FREE shipping!

Watch the application
Five real floors, no editing tricks. Pick the tone closest to yours and watch the finish come back as it's rubbed in.
Light Pine
Pale pine, decades dry. Watch how fast it soaks in.
Dark Brown
The colour deepens the second it touches the finish.
Walnut
Straight from the jar, rubbed in, buffed off. That's the whole job.
Light Brown I
The blotchy patches even out as it spreads.
Light Brown II
Same jar, different floor, same result.
ONE JAR. EVERY REAL-WOOD TONE.
One formula, no colour matching. It doesn't add colour. It brings back the colour your finish already had, whatever tone that is.
BEFORE → AFTER
The red-brown depth comes back. Nothing added, nothing painted over.
BEFORE → AFTER
Warm again, and still obviously wood, not a coating.
BEFORE → AFTER
The grain sharpens back up. The oak stays light.
BEFORE → AFTER
Even, deep, and zero plastic shine. The Rejuvenate look, without the Rejuvenate.
Made for real wood, including engineered wood with a real-wood surface. Not for non-absorbent laminate.
IF YOU'VE TRIED EVERYTHING
“It smells faintly of beeswax and wipes on like furniture polish. The scratches by the back door stopped showing before I'd even buffed it off, and the grey faded right behind them. Three months on it still looks fed, and I've done two rooms and a coffee table off one jar.”
Claw marks and scuffs look deeper when a dry finish scatters light around them. When the finish is fed and sealed, most stop catching your eye at all.
The flat grey path from the door to the couch is often the driest stretch of finish in the house. As it drinks in, the warmth and grain beneath start showing through again.
The beeswax helps leave a protective layer after you buff away the excess, so the oils stay where you put them. No sticky residue and no weekly redo.
HOW IT WORKS
No sanding. No stripping. No drying tents. Three steps and a soft cloth.
01
A quick pass with a damp cloth lifts dust and grime. No cleaning product, no prep chemicals.
02
Work a small amount into the wood in circles with the Luxgrove brush. You'll see the color deepen as the finish drinks it in. A little covers more than you think.
03
Let it settle briefly, then buff with a dry cloth until the haze lifts and the shine comes up. That's it.
Unsure about your floor's finish? Test a small concealed spot first — or email us a photo before ordering and we'll tell you honestly whether it will work.
Most homeowners burn through 3 or 4 of these before finding what works.
| Product | Treats the Finish | Survives Traffic | Safe to Refinish |
|---|---|---|---|
| Stain markers | × | × | ✓ |
| Old English | × | × | × |
| Rejuvenate | × | × | × |
| Bona polish | × | × | ✓ |
| Paste wax | × | × | × |
| Walnut trick | × | × | ✓ |
| Refinishing ($4,200) | ✓ | ✓ | — |
| Luxgrove Salve | ✓ | ✓ | ✓ |
Results may vary depending on floor condition and application.
FIND YOUR FLOOR FIT
We'd rather lose the sale than have this jar sit in your cupboard next to the other five that didn't work. Thirty seconds of honesty first.
Your floors have scratches, scuffs, or claw marks from pets
Your wood looks dull, dry, or faded and has lost its warmth
You have water rings, white marks, or sun-faded patches
You want to avoid the cost and disruption of professional refinishing
Your floors still have their finish intact but look tired and worn
You have solid or engineered real wood, parquet, aged wood furniture, or finished leather
You want to care for the natural tone and grain you already have
Your existing finish is still intact, but the surface looks dry, dull, or lightly worn
Your floors have deep structural gouges that go through the wood itself — that's a job for our Deep-Fill Wood Repair Kit first, then the salve.
You need to change the colour of your floor entirely
Your finish is completely stripped across the entire floor
You have laminate flooring with a photographic surface layer that will not absorb like real wood
You are looking for a paint or stain product
THE PROOF IS IN THE JAR
Start with one 8oz jar for targeted worn areas, a hallway, or roughly half a typical living room. For a very large living room or several high-traffic areas, choose two jars. Multiple rooms or a whole-home refresh? Three jars give you room to work.
REAL PEOPLE. REAL RESULTS.
Golden retrievers, 120-year-old doors, contractor quotes cancelled the week before. Real floors, real photos.
Golden retriever home
“We have a golden retriever and dark hardwood floors. I tried stain markers and they looked awful. Luxgrove didn't just colour the scratches, it blended them away completely. My floors have their dignity back.”
Cancelled the contractor
“I was literally days away from paying a contractor to refinish my floors. I bought two jars on a whim. I spent a Saturday afternoon rubbing it in and I am in shock. They look absolutely gorgeous.”
120-year-old doors
“I bought it for my floors but tried it on my grandmother's 120-year-old mahogany doors. They were so dry they looked grey. This salve soaked right in and brought back a richness I didn't know was still there.”
Engineered wood floors
“My dog absolutely destroyed my engineered wood floors. I was convinced I'd need to replace them entirely. Two coats of Luxgrove and you'd never know. The scratches are invisible and the floor looks brand new.”
Sun fading improved
“The floors near our south-facing windows had faded so badly compared to the rest of the room. Luxgrove brought the colour back. It's 90% better and I didn't have to refinish the floor.”
Works on leather too
“Not just for floors. I used the leftover salve on my leather sofa and it completely revived it. The cracking and fading is gone. It looks and feels brand new.”
YOUR QUESTIONS ANSWERED
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.
Add your answer here.